当前位置：首页 > 行业信息
特威DeVilbissAGXV自动喷枪高雾化喷枪木工家具喷枪
- 发布日期：
- 2019/4/13 14:45:47
- 内 容：
- Accessories sRemote Fan Control (KK-4955) Permits remote adjustment of pattern size sFluid Tip and Needle Sets Several kits are available for corrosive materials, primers and highly pigmented materials. sMounting Clamp (AGA-415) Clamps gun stud to rod, allowing gun rotation to any angle. sAbrasive Fluid Seal Kit (KK-5017) Designed for use with abrasive materials. sMounting Block Accessory Kit (KK-5046) Allows mounting the gun onto a 1/2" rod. sAdditional Accessories Fluid regulators, fluid strainers, air control units, gun and hose cleaning equipment and other accessories also are available. Accessories sConvert to HVLP by changing the spray head, air cap and baffle. (See Service Bulletin SB-2-628.) sFluid regulators, fluid strainers, air control, gun and hose cleaning equipment and other accessories are also available. sKK-5046 Mounting block kit for mounting gun on 1/2" rod. sFan control kit – for remote operation (KK-4955) Technical Specifications: Body:................................................... Machined aluminum Weight: ............................................... 26 oz (728 gr) without mounting stud 30 oz (840 gr) with mounting stud Cylinder Air Pressure: ........................ 100 psi (7 bar)max., 50 psi (3 bar) min. Air Inlet: ............................................. 100 psi (7 bar)max., 1/4" NPS (M) Fluid Inlet: ......................................... 100 psi (7 bar)max., 3/8" NPS (M) Wetted Parts: ...................................... 300 Grade stainless steel tips & needles, stainless steel fluid passages Feed Type:........................................... Pressure feed (Material Supply) Fluid Pressure: ................................... 100 psi (7 bar)max Mounting Stud:.................................. 3/4" dia. Service Bulletin:................................. SB-2-628 Gun Repair Kit:.................................. KK-4992-1 Technical Specifications: Body:................................................... Machined aluminum Weight: ............................................... 26 oz. (728 gr) without mounting stud 30.5 oz. (854 gr) with mounting stud Cylinder Air Pressure: ........................ 100 psi (7 bar)max., 50 psi (3 bar)min. Air Inlet: ............................................. 100 psi (7 bar)max., 1/4" NPS (M) Fluid Inlet: ......................................... 100 psi (7 bar)max., 3/8" NPS (M) Wetted Parts: AGX-550............... 300 & 400-grade stainless steel, PTFE AGX-552............... 300 & 400-grade stainless steel, Carbolloy, U.H.M.W. polyethylene AGX-553............... 300-grade stainless steel, U.H.M.W. polyethylene, PTFE Feed Type:........................................... Pressure feed (Material Supply) Fluid Pressure: ................................... 100 psi (7 bar)max. Mounting Stud:.................................. 3/4" dia. Service Bulletin:................................. SB-2-624 Gun Repair Kit:.................................. KK-4992-1 Chart 1 AGXV Air Caps—Patterns & Applications Air Cap # Typical Pattern Typical (Complete No.) Size & Shape* Application 33A 9"(229 mm) long, tapered ends Most common finishing materials (JGHV-101-33A) similar to 30 air cap up to 12 oz./min. (360 cc) 46MP 11"(280 mm) long, straight-sided Low VOC material (JGHV-101-46MP) similar to 704 air cap 12 to 16 oz./min. (360-480 cc) 83MP 13"(330 mm) long, straight-sided Low VOC material (JGHV-101-83MP) similar to 765 air cap 17 oz./min. (510 cc) & above AGXV TM Automatic Maximum Performer HVLP Spray Gun AGX Automatic Conventional Spray Gun *Actual pattern length dependent upon fluid tip (nozzle) ID, coating material flow rate, air pressure and fan pressure. Chart 2 AGX Air Caps If this No. on Cap, Ref. No. (2) Ref. No. (1 & 2) Order Air Cap Air Cap Less Retaining Ring With Retaining Ring 24 AV-40-24 30 MB-4039-30 58 AV-439-58 62 MB-4039-62HD 64 MB-4039-64HD 704 AV-1239-704 765 AV-1239-765 777 31767-777 797 AV-1239-797 Fluid Tip Orifice Sizes Letters on Tip Inch mm AC .110" 2.8 D .086" 2.2 E (Stainless) .070" 1.8 EE (Carbolloy) .070" 1.8 FF .055" 1.4 FX .042" 1.1 G .028" 0.7 Retaining ring required (MBC-368) ? 2013 DeVilbiss 2/13 195 Internationale Blvd. Glendale Heights, IL 60139 630-237-5000 Fax 630-237-5011 www.devilbiss.com
- 公司名称：
- 深圳市立扬科技有限公司
- 地区：
- 联系人：
- 孙清
- 联系电话/手机
- 13823127806
- 传真：
- 邮 箱：
- QQ/MSN：
- 信息来源：
https://www.sn180.com/buyer/buyview/2842305.html
