供应供应KROHNHITEMT56R

深圳市湾边贸易有限公司供应美国KROHN-HITE MT56R，KROHN-HITE 3362， KROHN-HITE model 6620， KROHN-HITE 7602 m等功率放大器。

• 2个独立滤波通道，1个带通通道

• 衰减: 24dB/Octave
• 滤波模式: 低通和高通
• 响应: Butterworth 和 Bessel
• 输入: 差分和单端
• 输入增益: 0dB to 50dB in 10dB steps
• 输出增益: 0dB to 20dB in 0.1dB steps
• 电池运行可选

• 衰减率：24dB/Octave
• 独立通道：2
• 切断频率：0.1Hz-200kHz
• 响应：Butterworth, Bessel
• 函数：LP, HP, BP, BR *
• BP, BR 通道：1
• 输入类型：单端 **, 差分
• 输入电压：±10V 峰值
• 输出电压：±10V 峰值
• 滤波前增益：50dB，步宽10dB
• 滤波后增益：20dB，步宽0.10dB
•  
• 尺寸
• 36.0cm×32.1cm×9.0cm
• 重量：
• 净    重：5.4kg
• 包装重量：6.3kg
•  

KROHN-HITE 3361 Single Channel; HP, LP; 24dB/octave, Diff./Single-Ended Input; Butterworth, Bessel; Gain 
KROHN-HITE Option 002: Extend low-end cutoff to 0.005Hz 
KROHN-HITE RK-314: Rack Mount Kit 
KROHN-HITE CAB-025: 3ft. BNC Cable (2 cables recommended) 
KROHN-HITE 3362 Dual Channel; HP, LP; 24dB/octave, Diff./Single-Ended Input; Butterworth, Bessel; Gain 
KROHN-HITE Option 002: Extend low-end cutoff to 0.005Hz 
KROHN-HITE Option BK-330: Battery Kit 
KROHN-HITE RK-314: Rack Mount Kit 
KROHN-HITE CAB-025: 3ft. BNC Cable (4 cables recommended) 
KROHN-HITE 3364 Four Channel; HP, LP; 24dB/octave, Diff./Single-Ended Input; Butterworth, Bessel; Gain 
KROHN-HITE Option 002: Extend low-end cutoff to 0.005Hz 
KROHN-HITE RK-314: Rack Mount Kit 
KROHN-HITE CAB-025: 3ft. BNC Cable (8 cables recommended) 
KROHN-HITE 3381 Single Channel; HP, LP; 48dB/octave, Diff./Single-Ended Input; Butterworth, Bessel; Gain 
KROHN-HITE Option 002: Extend low-end cutoff to 0.005Hz 
KROHN-HITE RK-314: Rack Mount Kit 
KROHN-HITE CAB-025: 3ft. BNC Cable (2 cables recommended) 
KROHN-HITE 3382 Dual Channel; HP, LP; 48dB/octave, Diff./Single-Ended Input; Butterworth, Bessel; Gain 
KROHN-HITE Option 002: Extend low-end cutoff to 0.005Hz 
KROHN-HITE Option BK-330: Battery Kit 
KROHN-HITE RK-314: Rack Mount Kit 
KROHN-HITE CAB-025: 3ft. BNC Cable (4 cables recommended) 
KROHN-HITE 3384 Four Channel; HP, LP; 48dB/octave, Diff./Single-Ended Input; Butterworth, Bessel; Gain 
KROHN-HITE Option 002: Extend low-end cutoff to 0.005Hz 
KROHN HITE RK-314: Rack Mount Kit 
KROHN HITE CAB-025: 3ft. BNC Cable (8 cables recommended) 
KROHN HITE 30A-1 Single Channel; Low-Pass; 1Hz to 99kHz, 115dB/octave; Diff/Single-Ended Input; Gain; Elliptic 
KROHN HITE 31A-1 Single Channel; High-Pass; 1Hz to 99kHz, 115dB/octave; Diff/Single-Ended Input; Gain; Elliptic 
KROHN HITE 34A Dual Channel; Low-Pass, High-Pass, Band-Pass, Band-Reject; 3Hz to 2MHz, Butterworth, Bessel, Gain 
KROHN HITE Option 020: Lower frequency cutoff range to 0.3Hz to 200kHz 
KROHN HITE 35 Single Channel; Low-Pass; Amplifier Mode; 170Hz to 25.6MHz; 24dB/octave; Butterworth 
KROHN HITE Option 005: Bessel response replaces Butterworth response 
KROHN HITE 38 Single Channel; Low-Pass, High-Pass; 0.03Hz to 1MHz; 48dB/octave; Butterworth, Bessel, Gain 
KROHN HITE Option 002: Extends low-end cutoff frequency range to 0.003Hz 
KROHN HITE 3905C Mainframe; GPIB Programmable, up to five plug-in cards 
KROHN HITE Option ME39A: Card extender 
KROHN HITE RK-317: Rack Mount Kit 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-025: 3ft. BNC Cable (recommend 2-3 per card depending on the model installed) 
KROHN HITE 3916C Mainframe; GPIB Programmable, up to sixteen plug-in cards 
KROHN HITE Option ME39A: Card extender 
KROHN HITE RK-817: Rack Mount Kit with Rack Slides 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-025: 3ft. BNC Cable (recommend 2-3 per card depending on the model installed) 
KROHN HITE 3900 Dual Channel; Low-Pass; 1Hz to 99kHz, 115dB/octave; Diff/Single-Ended Input; Gain; Elliptic 
KROHN HITE RK-37: Rack Mount Kit 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-025: 3ft. BNC Cable (6 cables recommended) 
KROHN HITE 3901 Dual Channel; Low-Pass, High-Pass; 1Hz to 99kHz, 115dB/octave; Diff/Single-Ended; Gain; Elliptic 
KROHN HITE RK-37: Rack Mount Kit 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-025: 3ft. BNC Cable (6 cables recommended) 
KROHN HITE 3940 Dual Channel; Low-Pass, High-Pass, Band-Pass, Band-Reject; 3Hz to 2MHz, Butterworth, Bessel, Gain 
KROHN HITE Option 020: Lower frequency cutoff range to 0.3Hz to 200kHz 
KROHN HITE RK-37: Rack Mount Kit 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-025: 3ft. BNC Cable (4 cables recommended) 
KROHN HITE 3944 Four Channel; LP, HP, BP, BR; 3Hz to 2MHz, Butterworth, Bessel, Gain 
KROHN HITE Option 020: Lower frequency cutoff range to 0.3Hz to 200kHz 
KROHN HITE RK-37: Rack Mount Kit 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-025: 3ft. BNC Cable (8 cables recommended) 
KROHN HITE 3945 Three Channel; Low-Pass, High-Pass, Band-Pass, Band-Reject; two channels; 
KROHN HITE RK-37: Rack Mount Kit 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-025: 3ft. BNC Cable (6 cables recommended) 
KROHN HITE 3955 Dual Channel; Low-Pass, 170Hz to 25.6MHz, 24dB/octave; Butterworth; Amplifier Mode 
KROHN HITE Option 005: Bessel response replaces Butterworth response 
KROHN HITE RK-37: Rack Mount Kit 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-025: 3ft. BNC Cable (4 cables recommended) 
KROHN HITE 3988 Dual Channel; LP, HP, BP, BR; 0.03Hz to 1MHz; 48dB/octave; Butterworth, Bessel; Gain 
KROHN HITE Option 002: Extends low-end cutoff frequency range to 0.003Hz 
KROHN HITE RK-37: Rack Mount Kit 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-025: 3ft. BNC Cable (6 cables recommended) 
KROHN HITE FMB3002AC-S AC Powered Dual Channel Single-Ended Filter/Amplifier Chassis 
KROHN HITE FMB3002DC-S DC Powered Dual Channel Single-Ended Filter/Amplifier Chassis 
KROHN HITE FMB3002AC-D AC Powered Dual Channel Differential Filter/Amplifier Chassis 
KROHN HITE FMB3002DC-D DC Powered Dual Channel Differential Filter/Amplifier Chassis 
KROHN HITE Option G1: 5 Position Input Gain Switch with Gains of 0dB, 10dB, 20dB, 30dB and 40dB 
KROHN HITE Option G2: 10 Position Output Gain Switch with Gains of 0dB to 16dB in 2dB Steps and 20dB 
KROHN HITE HEBAT: High Energy Lithium Battery Set 
KROHN HITE CAB-018: Three Foot BNC Cable 
KROHN HITE CON-045: Screw-Terminal Mating Plug, 3-Position Diff Input and Rear Panel DC Power Connections 
KROHN HITE Fuse: Part No. 021033 0.125A, slow-blow. 
KROHN HITE FLX-3007 7-Slot Instrumentation Chassis 
KROHN HITE RK-517: Rack Mount Kit 
KROHN HITE RK-518: Rack Mount Kit for Mounting 2 FLX-3007 Side-By-Side 
KROHN HITE FLX-ICP4 Four Channel Plug-In ICP® Filter/Amplifier Card 
KROHN HITE CON-055: Screw-Terminal Mating Plug, 8-Position, FLX-ICP4 Card 
KROHN HITE CON-056: Screw-Terminal Mating Plug, 12-Position, FLXICP4 Card 
KROHN HITE FLX-302 Dual Channel Differential BNC Filter/Amplifier Card 
KROHN HITE CAB-018: Three Foot BNC Cable (6 recommended) 
KROHN HITE FLX-303 Three Channel Single-Ended BNC Filter/Amplifier Card 
KROHN HITE CAB-018: Three Foot BNC Cable (6 recommended) 
KROHN HITE FLX-306 Six Channel High-Density Plug-In Filter/Amplifier Card 
KROHN HITE CON-057: Screw-Terminal Mating Plug, 10-Position, FLX-306 Card 
KROHN HITE 3FSX (x=number poles) 1 to 4-Pole Single Ended Filter/Amplifier Module for FMB3002 and FLX Cards 
KROHN HITE 3FSX (x=number poles) 5 to 8-Pole Single Ended Filter/Amplifier Module for FMB3002 and FLX Cards 
KROHN HITE 3FS16 16-Pole Single Ended Filter/Amplifier Module for FMB3002 and FLX Cards 
KROHN HITE 3FDX (x=number poles) 1 to 4-Pole Differential Filter/Amplifier Module for FMB3002 and FLX Cards 
KROHN HITE 3FDX (x=Number poles) 5 to 8-Pole Differential Filter/Amplifier Module for FMB3002 and FLX Cards 
KROHN HITE 3FD16 16-Pole Differential Filter/Amplifier Module for FMB3002 and FLX Cards 
KROHN HITE 3FAS Single-Ended Low Noise Amplifier 
KROHN HITE 3FAD Differential Low Noise Amplifier 
KROHN HITE Option EG1: External Input Gain (needed for FLX-3007 and FMB3002 with G1 Option) 
KROHN HITE Option EG2: External Output Gain (needed for FLX-3007 and FMB3002 with G2 Option) 
KROHN HITE Lot Charge: Lot charge per order 
KROHN HITE NRE Charge: Non-recurring engineering charge for frequencies >200kHz 
KROHN HITE (for frequencies above 200kHz, a non-recurring engineering charge of 
KROHN HITE 1200A Function Generator; 0.2Hz to 3MHz; Linear Sweep; DC Offset 
KROHN HITE RK-39: Rack Mount Kit 
KROHN HITE CAB-025: 3ft. BNC Cable (1 cable recommended) 
KROHN HITE 4402B RC Oscillator; 1Hz to 110kHz; Ultra-Low Distortion of 0.0002%; Auxiliary Outputs 
KROHN HITE RK-39: Rack Mount Kit 
KROHN HITE CAB-025: 3ft. BNC Cable (1 cable recommended) 
KROHN HITE 6620A 10Hz to 10MHz; 0.01o Resolution; 0.05o Accuracy; GPIB Programmable 
KROHN HITE Option 002: Extends Low-End Operation to 1Hz 
KROHN HITE Option 003: Rear Panel BNC Connectors 
KROHN HITE RK-316: Rack Mount Kit 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-025: 3ft. BNC Cable (2 cables recommended) 
KROHN HITE 6900B 5Hz to 1MHz; 0.1V to 130Vrms Input; Voltmeter; Totally Automatic 
KROHN HITE Option 001: BCD Output 
KROHN HITE Option 002: dB Display of Distortion 
KROHN HITE RK-316: Rack Mount Kit 
KROHN HITE CAB-025: 3ft. BNC Cable (2 cables recommended) 
KROHN HITE 7000 DC to 1MHz, Low Noise Differential Preamplifier 
KROHN HITE Option RMS: RMS-to-DC Output 
KROHN HITE RK-39: Rack Mount Kit 
KROHN HITE CAB-025: 3ft. BNC Cable (2 cables recommended) 
KROHN HITE 7500 75 Watts; DC to 1MHz; 140Vrms Output; 625mA, Gain of 100 
KROHN HITE Option 011: Remote Control of Gain 
KROHN HITE RK-519: Rack Mount Kit 
KROHN HITE CAB-018: Cable, Multi-Stacking Double Banana Plug (2 cables recommended) 
KROHN HITE CAB-025: 3ft. BNC Cable (1 cable recommended) 
KROHN HITE 7600M 17 Watts; DC to 1MHz; 141Vrms Output, Gain of 100, Metered Output 
KROHN HITE Option 003: Rear Panel Input Output Connectors and Binding Posts 
KROHN HITE Option 015: Remote Control of Gain 
KROHN HITE RK-37: Rack Mount Kit 
KROHN HITE CAB-018: Cable, Multi-Stacking Double Banana Plug (2 cables recommended) 
KROHN HITE CAB-025: 3ft. BNC Cable (1 cable recommended) 
KROHN HITE 7602M 34 Watts; DC to 1MHz; 282Vrms Output, Gain of 100, Metered Output 
KROHN HITE Option 003: Rear Panel Input Output Connectors and Binding Posts 
KROHN HITE Option 015: Remote Control of Gain 
KROHN HITE RK-37: Rack Mount Kit 
KROHN HITE CAB-018: Cable, Multi-Stacking Double Banana Plug (2 cable recommended) 
KROHN HITE CAB-025: 3ft. BNC Cable (1 cable recommended) 
KROHN HITE MT56R Impedance Matching Transformer 
KROHN HITE CAB-018: Cable, Multi-Stacking Double Banana Plug (2 cables recommended) 
KROHN HITE CAB-025: 3ft. BNC Cable (1 cable recommended) 
KROHN HITE 523 4ppm; Low Noise DC Voltage and Current; GPIB Programmable 
KROHN HITE Option KH523CAL Calibration Software Program 
KROHN HITE RK-314: Rack Mount Kit 
KROHN HITE PCR100: 100 Ohm Precision Resistor 
KROHN HITE Option Case 2720B: Protective Carrying Case 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-018: Cable, Multi-stacking Double Banana Plug 
KROHN HITE CAB-023: Cable Set: Low Thermal EMF Retractable Banana Plug 
KROHN HITE CAB-024: Cable Set, Low Thermal EMF Spade Lug 
KROHN HITE 526 20ppm; Low Noise DC Voltage and Current; GPIB/LAN Programmable 
KROHN HITE Option LAN: Remote Control 
KROHN HITE RK-314: Rack Mount Kit 
KROHN HITE Option Case 2720B: Protective Carrying Case 
KROHN HITE PCR100: 100 Ohm Precision Resistor 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-018: Cable, Multi-stacking Double Banana Plug 
KROHN HITE CAB-023: Cable Set: Low Thermal EMF Retractable Banana Plug 
KROHN HITE CAB-024: Cable Set, Low Thermal EMF Spade Lug 
KROHN HITE 511 DC Voltage, ±100nVdc to 11.1110Vdc, 2ppm Stability, 10ppm Accuracy 
KROHN HITE Option 003: Rear Panel Connectors 
KROHN HITE RK-314: Rack Mount Kit 
KROHN HITE Option Case 2720B: Protective Carrying Case 
KROHN HITE CAB-018: Cable, Multi-stacking Double Banana Plug 
KROHN HITE CAB-023: Cable Set: Low Thermal EMF Retractable Banana Plug 
KROHN HITE CAB-024: Cable Set, Low Thermal EMF Spade Lug 
KROHN HITE PCS-2/B DC & AC Current Calibrator; GPIB Programmable 
KROHN HITE CAB-10: GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11: GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-018: Cable, Multi-stacking Double Banana Plug 
KROHN HITE CAB-023: Cable Set: Low Thermal EMF Retractable Banana Plug 
KROHN HITE CAB-024: Cable Set, Low Thermal EMF Spade Lug 
KROHN HITE 3210C 100mAac to 100Aac Transconductance Amplifier 
KROHN HITE CAB-018: Cable, Multi-stacking Double Banana Plug 
KROHN HITE CAB-023: Cable Set: Low Thermal EMF Retractable Banana Plug 
KROHN HITE CAB-024: Cable Set, Low Thermal EMF Spade Lug 
KROHN HITE PCR100 100 Ohm Precision Resistor 
KROHN HITE RK-02 Rack Mount Kit for Model MV106, CR103 
KROHN HITE RK-37 Rack Mount Kit for Models 3900, 3901, 3940, 3944, 3945, 3955, 3988, 7600M, 7602, 7602M 
KROHN HITE RK-317-2 Rack Mount Kit to mount two units side-by-side. Models include: 3900, 3901, 3940, 3944, 
KROHN HITE RK-39 Rack Mount Kit for Model 1200A and 4402B 
KROHN HITE RK-314 Rack Mount Kit for Models 3361, 3362, 3364, 3381, 3382, 3384, 511, 523, 526 
KROHN HITE RK-316 Rack Mount Kits for Models 6620, 6900B 
KROHN HITE RK-317 Rack Mount Kit for Model 3905B 
KROHN HITE RK-319 Rack Mount Kit for Models 6900A 
KROHN HITE RK-517 Rack Mount Kit for FLX-3007 
KROHN HITE RK-518 Rack Mount Kit for mounting two FLX-3007 Side-by-Side 
KROHN HITE RK-519 Rack Mount Kit for Models 7500 
KROHN HITE RK-817 Rack Mount Kit for Model 3916B includes Rack Slides 
KROHN HITE CAB-005 Cable, Two Conductor Shielded Balanced Line 
KROHN HITE CAB-10 GPIB Cable with Connectors, 2-Meters 
KROHN HITE CAB-11 GPIB Cable with Connectors, 1-Meter 
KROHN HITE CAB-018 Cable, Multi-Stacking Double Banana Plug 
KROHN HITE CAB-023 Cable Set, Low Thermal EMF Retractable Banana Plug 
KROHN HITE CAB-024 Cable Set, Low Thermal EMF Spade Lug 
KROHN HITE CAB-025 Cable, 3ft., BNC 
KROHN HITE CON-13/15 Output Connector, Mate, 6-Pin 
KROHN HITE CASE2027B Protective carrying case for models 511, 523, 526, 3361, 3362, 3364, 3381, 3382, 3384 
KROHN HITE PS488 Parallel to IEE-488 Bus Adapter (Model 522 only) 
KROHN HITE RS-15 Rack Slides; 15 Inch 
KROHN HITE RS-20 Rack Slides; 20 Inch 
KROHN HITE BR-30 Band-Reject Kit for Models 3362, 3364, 3382, 3384, 3945, 3901, 3988, 3905B and 3916B 
KROHN HITE 002004 Replacement Battery for Battery Kits BK-330. 
KROHN HITE Manuals - Non-Programmable Instruments 
KROHN HITE Manuals - Programmable Instruments 
KROHN HITE Manuals - Out of Print 
KROHN HITE Certificate to (MIL-STD-45662A) ANSI/NCSL-Z540-1 (Incoming) 
KROHN HITE Certificate to (MIL-STD-45662A) ANSI/NCSL-Z540-1 (Outgoing) 
KROHN HITE Service & Labor. . . . . Minimum Charge

 3361 Single Channel; HP, LP; 24dB/octave, Diff./Single-Ended Input; Butterworth, Bessel; Gain
Option 002: Extend low-end cutoff to 0.005Hz
RK-314: Rack Mount Kit
CAB-025: 3ft. BNC Cable (2 cables recommended)
3362 Dual Channel; HP, LP; 24dB/octave, Diff./Single-Ended Input; Butterworth, Bessel; Gain
Option 002: Extend low-end cutoff to 0.005Hz
Option BK-330: Battery Kit
RK-314: Rack Mount Kit
CAB-025: 3ft. BNC Cable (4 cables recommended)
3364 Four Channel; HP, LP; 24dB/octave, Diff./Single-Ended Input; Butterworth, Bessel; Gain
Option 002: Extend low-end cutoff to 0.005Hz
RK-314: Rack Mount Kit
CAB-025: 3ft. BNC Cable (8 cables recommended)
3381 Single Channel; HP, LP; 48dB/octave, Diff./Single-Ended Input; Butterworth, Bessel; Gain
Option 002: Extend low-end cutoff to 0.005Hz
RK-314: Rack Mount Kit
CAB-025: 3ft. BNC Cable (2 cables recommended)
3382 Dual Channel; HP, LP; 48dB/octave, Diff./Single-Ended Input; Butterworth, Bessel; Gain
Option 002: Extend low-end cutoff to 0.005Hz
Option BK-330: Battery Kit
RK-314: Rack Mount Kit
CAB-025: 3ft. BNC Cable (4 cables recommended)
3384 Four Channel; HP, LP; 48dB/octave, Diff./Single-Ended Input; Butterworth, Bessel; Gain
Option 002: Extend low-end cutoff to 0.005Hz
RK-314: Rack Mount Kit
CAB-025: 3ft. BNC Cable (8 cables recommended)
#VALUE!
30A-1 Single Channel; Low-Pass; 1Hz to 99kHz, 115dB/octave; Diff/Single-Ended Input; Gain; Elliptic
31A-1 Single Channel; High-Pass; 1Hz to 99kHz, 115dB/octave; Diff/Single-Ended Input; Gain; Elliptic
34A Dual Channel; Low-Pass, High-Pass, Band-Pass, Band-Reject; 3Hz to 2MHz, Butterworth, Bessel, Gain
Option 020: Lower frequency cutoff range to 0.3Hz to 200kHz
35 Single Channel; Low-Pass; Amplifier Mode; 170Hz to 25.6MHz; 24dB/octave; Butterworth
Option 005: Bessel response replaces Butterworth response
38 Single Channel; Low-Pass, High-Pass; 0.03Hz to 1MHz; 48dB/octave; Butterworth, Bessel, Gain
Option 002: Extends low-end cutoff frequency range to 0.003Hz
3905C Mainframe; GPIB Programmable, up to five plug-in cards
Option ME39A: Card extender
RK-317: Rack Mount Kit
CAB-10: GPIB Cable with Connectors, 2-Meters
CAB-11: GPIB Cable with Connectors, 1-Meter
CAB-025: 3ft. BNC Cable (recommend 2-3 per card depending on the model installed)
3916C Mainframe; GPIB Programmable, up to sixteen plug-in cards
Option ME39A: Card extender
RK-817: Rack Mount Kit with Rack Slides
CAB-10: GPIB Cable with Connectors, 2-Meters
CAB-11: GPIB Cable with Connectors, 1-Meter
CAB-025: 3ft. BNC Cable (recommend 2-3 per card depending on the model installed)
#VALUE!
#VALUE!
#VALUE!
#VALUE!
3900 Dual Channel; Low-Pass; 1Hz to 99kHz, 115dB/octave; Diff/Single-Ended Input; Gain; Elliptic
RK-37: Rack Mount Kit
CAB-10: GPIB Cable with Connectors, 2-Meters
CAB-11: GPIB Cable with Connectors, 1-Meter
CAB-025: 3ft. BNC Cable (6 cables recommended)
3901 Dual Channel; Low-Pass, High-Pass; 1Hz to 99kHz, 115dB/octave; Diff/Single-Ended; Gain; Elliptic
RK-37: Rack Mount Kit
CAB-10: GPIB Cable with Connectors, 2-Meters
CAB-11: GPIB Cable with Connectors, 1-Meter
CAB-025: 3ft. BNC Cable (6 cables recommended)
3940 Dual Channel; Low-Pass, High-Pass, Band-Pass, Band-Reject; 3Hz to 2MHz, Butterworth, Bessel, Gain
Option 020: Lower frequency cutoff range to 0.3Hz to 200kHz
RK-37: Rack Mount Kit
CAB-10: GPIB Cable with Connectors, 2-Meters
CAB-11: GPIB Cable with Connectors, 1-Meter
CAB-025: 3ft. BNC Cable (4 cables recommended)
3944 Four Channel; LP, HP, BP, BR; 3Hz to 2MHz, Butterworth, Bessel, Gain
Option 020: Lower frequency cutoff range to 0.3Hz to 200kHz
RK-37: Rack Mount Kit
CAB-10: GPIB Cable with Connectors, 2-Meters
CAB-11: GPIB Cable with Connectors, 1-Meter
CAB-025: 3ft. BNC Cable (8 cables recommended)
3945 Three Channel; Low-Pass, High-Pass, Band-Pass, Band-Reject; two channels;
#VALUE!
RK-37: Rack Mount Kit
CAB-10: GPIB Cable with Connectors, 2-Meters
CAB-11: GPIB Cable with Connectors, 1-Meter
CAB-025: 3ft. BNC Cable (6 cables recommended)
3955 Dual Channel; Low-Pass, 170Hz to 25.6MHz, 24dB/octave; Butterworth; Amplifier Mode
Option 005: Bessel response replaces Butterworth response
RK-37: Rack Mount Kit
CAB-10: GPIB Cable with Connectors, 2-Meters
CAB-11: GPIB Cable with Connectors, 1-Meter
CAB-025: 3ft. BNC Cable (4 cables recommended)
3988 Dual Channel; LP, HP, BP, BR; 0.03Hz to 1MHz; 48dB/octave; Butterworth, Bessel; Gain
Option 002: Extends low-end cutoff frequency range to 0.003Hz
RK-37: Rack Mount Kit
CAB-10: GPIB Cable with Connectors, 2-Meters
CAB-11: GPIB Cable with Connectors, 1-Meter
CAB-025: 3ft. BNC Cable (6 cables recommended)